Philips Daily Collection Cafetière une tasse User Manual

Page 7

Advertising
background image

Using the appliance

1

Fill the cup or cups you are going to use with fresh, cold water.

2

Pour the water into the water tank (Fig. 2).

Do not fill the water tank beyond the MAX indication.

3

Put a paper filter (no. 101) in the filter holder. (Fig. 3)

, Some types come with a permanent filter (Fig. 4).

Never use a permanent filter and a paper filter at the same time.
Note: You can also order the permanent filter separately (see chapter ‘Ordering accessories’).

4

Put ground coffee (filter-fine grind) in the filter (Fig. 5).

- If you grind the coffee beans yourself, do not grind them too finely.

- Take approx. two level measuring spoons of ground coffee for each cup when you use large

cups (for instance the cups that come with the appliance).

- Take one level measuring spoon of ground coffee for each cup when you use smaller cups.

- You can adapt the amount of coffee to your own taste.

5

Place the cup or cups under the coffee spouts (Fig. 6).

6

Press the button to switch on the appliance (Fig. 7).

The power-on light goes on.
Do not remove the cup or cups while the appliance is brewing.
Note: During brewing, you can only switch off the appliance by removing the mains plug from the wall

socket. When you reinsert the plug into the wall socket, the appliance continues brewing until the water

reservoir is empty.

7

The appliance switches off automatically after brewing. After the power-on light goes out,

wait until no more coffee drips from the coffee spouts before you remove the cup or cups.

Note: The appliance does not keep the coffee hot.

- The drip stop prevents coffee from dripping onto the drip tray after brewing. This drip stop may

cause some water to remain behind in the filter holder. This does not mean that the filter is

clogged.

8

If you have used a paper filter, throw it away (Fig. 8).

9

If you have used the permanent filter, empty and rinse it (Fig. 9).

Let the appliance cool down for at least 4 minutes before you start to brew coffee again.
Note: Let the appliance cool down for at least 4 minutes before you start to brew coffee again.

cleaning

Never immerse the appliance in water or any other liquid, nor rinse it under the tap.

1

Unplug the appliance.

2

Clean the appliance with a moist cloth.

3

Clean the separate parts (drip tray, filter holder and permanent filter, if any) in warm water

with some washing-up liquid or in the dishwasher.

EnglisH

7

Advertising