Philips AVENT Écoute-bébé DECT - Manual (Page 13)

13
6.5 Reset
This function allows you to reset the parent unit
and the baby unit to the factory default settings.
1
Switch off the unit.
2
Press and hold the - button.
3
Switch on the unit again while holding the -
button.
6.5.1 Default settings
Parent unit
• Language: English
• Loudspeaker volume: 3
• Microphone sensitivity: 3
• Temperature alert: off
• ‘Temperature low’ alert: 14°C (57°F)
• ’Temperature high’ alert: 35°C (95°F)
• Temperature scale: Celsius
• Eco Max mode: off
• Feed timer: 02:00
• Feed timer: Stop
• Clock: hidden
Baby unit
• Loudspeaker volume: 4
• Nightlight: off
• Lullaby: off (lullaby 1 selected)
7
Disconnect the parent unit from the mains. It
is now ready for cordless use.
D Note:
You can charge the parent unit when it is switched
off. In that case only the battery status indicator is
visible.
D Note:
If the rechargeable batteries run low very quickly,
they have reached the end of their life and you
have to replace them. To order new rechargeable
batteries, see chapter ‘Ordering accessories’.
6.4 Signal strength indicator
6.4.1 In Smart Eco mode
Smart Eco mode is the standard operating mode.
In this mode, the strength of the DECT signal
depends on the distance between the baby unit
and the parent unit.
• If the signal strength indicator has 4 bars, the
connection between the baby unit and the
parent unit is excellent.
• If the signal strength indicator has 1 bar or
no bar at all, the transmission signal from the
baby unit is very weak or not available. Take
the parent unit closer to the baby unit to get
a better signal.
6.4.2 In Eco Max mode
In this mode, the DECT signal from the baby unit
to the parent unit is switched off.
• The signal strength indicator has no bar at all
when the baby unit has switched off its DECT
signal, even when the parent unit is within
range of the baby unit.
• When the baby unit starts to transmit a
DECT signal because the baby is making a
sound, the display goes on and the signal
strength indicator shows the quality of the
connection between baby unit and parent
unit.
• For more information on the Eco Max mode,
see ‘Eco Max mode’ in chapter ‘Menu of the
parent unit’.
ENGLISH