Bel Canto Design PRe2 - Manual (Page 3)

The power supply on the PRe2/P is pre-
set for the proper national voltage. The
power cable should have the correct
plug for your local power system. If you
believe this to not be true, please con-
tact your dealer immediately.
Warning !
Do not connect power to this
preamplifier yet!
This preamplifier, like any electrical com-
ponent, can be dangerous and cause
injury unless correct handling proce-
dures are observed and used. Before
powering this preamplifier it is neces-
sary to read and follow proper setup
and procedures.
page 3 © 2002-2004 bel canto design, Ltd. PRe2/P User’s Guide rev072004
Unpacking your PRe2/P
Power Connection
PRe2/P box contents include the following:
1 (one) - PRe2/P Analog Preamplifier
1 (one) - PRe2/P User’s Guide
1 (one) - Power cord [6.6’ - 2 meters long]
1 (one) - Remote Control
1 (one) – Warranty Sheet
Carefully unpack each piece and check
for shipping damage. If there is any
damage, or if anything is missing,
please contact your dealer, distributor or
Bel Canto Design.
IMPORTANT: Save all packing
materials as the packing is spe-
cially designed to protect the unit during
transportation or shipping. If the packag-
ing becomes lost or damaged, please
contact your dealer, distributor or Bel
Canto before attempting to transport
your unit.