BKI VG16 - Manual (Page 5)

NOTICE:
THE COMBIN ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY DATA
IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI.
COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI.
ALL RIGHTS ARE RESERVED.
ATION OF FACTS, DATA, DESIGN ELEMENTS,
WHICH MAY BE CONTAINED
THESE MATERIALS ARE NOT TO BE USED OR
IMPORTANT: IMPORTANT:
B
EFORE CARRYING OUT THE NEXT STAGE
,
THE OVEN MUST BE ISOLATED FROM THE
ELECTRICAL SUPPLY BY WITHDRAWING THE MAINS PLUG
.
The Fan Guards form an integral part of the oven lining & as such, it is
essential to replace these panels before re-connecting the electrical supply.
The fan guard should be removed and cleaned along with the discs and shaft.
To remove a fan guard:
Press as shown at both
ends and pull down to
unclip from the retaining
slots.