Blaupunkt KIEL RD 104 - Manual (Page 14)

27
Kiel RD 104
DE
UT
S
C
H
EN
GLI
S
H
IT
A
L
IANO
POR
T
UG
UE
S
NE
DE
RL
AND
ESP
A
GÑ
OL
SVEN
SK
A
F
RANÇAI
S
DSC programming
This car radio offers direct software control
(DSC) to adapt a number of default settings
to your personal needs and to store them.
In the following you will find an overview of all
the default settings adjusted at the factory.
To change a programmed parameter,
•
press DSC.
Then use the rocker switch to select and
change the functions described below.
The display shows the the adjusted condi-
tion.
Select function
Select function
Change-
setting
Change-
setting
BEEP Achnowledgement tone for
all functions where the re-
spective button has to be
held down for more than 2
seconds to activate the func-
tion.
Adjust volume between
0 and 9 (0 = OFF).
BRIGHT The display brightness can
be adjusted between 1 and
15. You may set one day
and one night adjustment.
Brightness of night illumina-
tion:
Switch on the vehicle’s light-
ing system and program the
brightness value. For this,
the illumination connector
has to be hooked up to the
electric system of the car.
COLOUR COLOUR green << >> red
CD DISP Use this function to display
CD PLAY or TIME.
LED ON You can select between LED
ON and LED OFF.
LOUDNESS When listening at a low level,
the loudness function will
create a more natural sound
by emphasizing the low fre-
quency range.
LOUD 1 - no boost/off
LOUD 6 - strong boost
SCANTIME Use this function to specify
the scan time (in the CD and
radio mode). Choose a value
between 5 and 30 seconds.
S-DX 1 Use this function to adjust
the seek tuning sensitivity for
distant reception.
DX. 1 - high sensitivity
DX. 3 - low sensitivity
S-LO 1 Use this function to adjust
the seek tuning sensitivity for
local reception.
LO. 1 - high sensitivity
LO. 3 - low sensitivity
SPEECH Use this function for individu-
al adjustment of the sound
parameters, e.g. for speech
programs.
SPEECH 0 - max. treble
SPEECH 4 - min. treble