Binatone 2300 - Manual (Page 29)

Binatone Help Line : 0845 345 9677 27
Press the MENU/OK scroll DOWN until you see SETTINGS.
Press the MENU/OK then scroll DOWN until you see “BS DEFAULT”.
Press the MENU/OK and the display will show “PIN ?”.
Enter the PIN code using the keypad. (Default PIN is 0000)
Press the MENU/OK and you will hear the confirmation beeps and
the display will return to idle mode.
To Set Base to default settings
Press the MENU/OK . Scroll DOWN until you see “SETTINGS”.
Press the MENU/OK and then you will see “DELETE HS”.
Scroll DOWN until you see “DIAL MODE”. Press the MENU/OK and the
display will show the current setting of Dialling Mode e.g. “TONE” or
“PULSE”.
Press the PHONE BOOK/BACK until you return to idle mode.
To Set Dialling Mode (Tone/Pulse)
However, for some old telephone lines or PABX systems you may need to change
the dialling mode from Tone to Pulse.
Press the UP or DOWN button to show the dialling mode you want on the display.
Press the MENU/OK button to confirm the option, and you will hear the
confirmation beeps. The display will return to "DIAL MODE" .
or
This allows you to restore base settings to their default settings:
Ext Ringer Volume = 5 Ext Ringer Melody = 1 Int Ringer Volume = 5
Int Ringer Melody = 2 Dial Mode = TONE Flash Time = 100ms
Key Tone = ON Language = ENGLISH PIN CODE = 0000
The Caller Display (CID) and Redial lists will be erased, but the Phonebook memories
and TAM settings will remain unchanged.
The default setting of this CC2300 telephone is TONE (also called Touch Tone, MF or DTMF),
and normally this will be correct for the UK, so will not need to be changed.