Bravetti EP595H - Manual (Page 3)

Fig. 1
a
b
Read all the sections of this booklet and follow all the instructions carefully.
3
OPERATING INSTRUCTIONS
1. Before using your mixer for the first
time, wash the beaters, dough hooks,
and bowl in warm, sudsy water. Rinse
and dry thoroughly. Use a damp cloth
to wash the mixer base. Dry with
a soft cloth. NEVER immerse the
mixer in water or any other liquids.
2. Before assembling your mixer, make
sure that the power cord is unplugged
from the electrical outlet and that the
On/Off beater speed control is at the
“Off” position.
1. Ensure that the mixer is not
plugged in to an electrical outlet
and that the On/Off beater speed
selector is on the “Off” position.
2. Press the mixer head release
button and tilt the mixer head
upwards. (Fig. 1)
NOTE: The mixer head will lock in the
‘tilt’ position.
Warning: To avoid injury when inserting
or removing beaters or dough hooks,
always set the speed selector to the
“Off” position and unplug the appliance.
Attaching the Beaters to the
Mixer
NOTE: Ensure that the dough hooks
are properly inserted into the correct
sockets in the correct manner or your
mixer or hooks could be damaged.
3. Select the desired attachments
depending on the mixing task at
hand:
Beaters-For creaming butter and
sugar, mixing cake and muffin
mixes or whisking cream or egg
whites.
Dough Hooks-For kneading dough,
and other heavy mixes.
4. To insert the beaters: take
the two beaters, the
oval shaped beater (a) is
placed in the left socket,
of the mixer head, (outer
position). Place the beater
with the plastic scrapers (b)
on the base into the right
socket, (inner position). (Fig. 2)
a b
b
a
Fig. 2
a b
Fig. 3
6. Ensure that both the beaters or
dough hooks click firmly into
place, if required you can twist the
attachments slightly to engage
them into position prior to pushing
them into the sockets.
Mixer Head Release Button
5. To insert the beaters: take
the two dough hooks,
place the dough hook with
the shorter hook at the
bottom (a) into the left
socket of the mixer head.
Then place the longer dough
hook (b) into the right socket
(inner position) of the mixer
head. (Fig. 3)
TIP: Start mixing at slow speeds and
increase speed gradually to prevent
ingredients splashing out of the mixing
bowl. When adding dry ingredients,
particularly flour, lower the speed
temporarily until ingredients are
combined.
TIP: When kneading yeast doughs, use
‘LOW’ speed to achieve best results.
Selecting the Mixing Bowl Speed
1. The mixing bowl automatically turns
when the On/Off beater speed
selector is turned on. Most tasks
will require the ‘LOW’ speed
setting.
2. To select the ‘HIGH’ bowl
speed turn the bowl speed
selector clockwise
towards ‘HIGH’. This
setting is best used for maximum
performance required for dishes such
as meringue, and cakes.
NOTE: The mixture passes through the
beaters more often yielding faster results.
For large volume mixtures the bowl
speed should be set at ‘LOW’.
3. When mixing is complete, turn the
On/Off beater speed selector to the
“Off” position and unplug the unit.
Fig. 4
Lock Unlock
OPERATING INSTRUCTIONS
1. Press the mixer head release button,
located on the side. While the button
is depressed, ease the mixer head
back.
NOTE: The mixer head will lock in the
‘tilt’ position.
2. Place the mixing bowl onto the metal
base so that it is sitting evenly. Lock
the bowl into place by turning it
clockwise. (Fig. 4)
Fitting the Bowl onto the Base
3. Press the mixer head release button
and hold while pushing the mixer
head downwards with the selected
attachments in place. (Fig. 5)
Using the Mixer
Warning:
To avoid injury when inserting
or removing beaters or dough hooks,
always set the speed selector to the
“Off” position and unplug the appliance.
1. With the On/Off - beater speed
selector in the “Off” position, plug the
power cord into a 120 volt power
outlet.
NOTE: The power indicator light will now
be illuminated.
2. Use the On/Off – beater speed
selector to turn the unit on and off and
to control the speeds for mixing.
(Fig. 6)
4
Mixer Head
Release Button
Fig. 5
Fig. 6
On/Off-Beater
Speed Selector
HIGH-LOW Bowl
Speed Selector
Power
Indicator
Warning: To avoid injury when inserting
or removing beaters or dough hooks,
always set the speed selector to the
“Off” position and unplug the appliance.