Britax Marathon User Manual
Page 6
Vehicle Seating Positions
Vehicle Safety Belts
9
8
NOTE:
The information in this section applies
only to installation with vehicle belts .
IMPORTANT:
Some vehicles have no seating
positions which are compatible with this
child restraint, or any other child restraint . If
in doubt, contact the vehicle manufacturer
for assistance .
The following types of vehicle belts are not
compatible with this child restraint:
Front vehicle belts with top or bottom
anchorage points in the door .
Motor-driven, automatic vehicle belts .
Three-point belts that have separate
retractors for the shoulder section and
the lap section .
Non-locking, Emergency Locking
Retractor (ELR), two-point vehicle belts .
Lap-Shoulder ELR vehicle belts without
the use of the built-in lock-offs .
The owner's manual for your vehicle will have information on the
types of vehicle belts in your vehicle . If your belt type is listed above,
select another seating position or use LATCH (Lower Anchors and
Tethers for Children) connectors .
This child restraint can fit securely in most vehicles using the existing
vehicle belts . However, some types of vehicle designs prevent a secure
fit of the child restraint due to the position of the vehicle belt lower
anchorage points .
WARNING:
Forward facing vehicle seats MUST be used with this child
restraint . Side facing or rear-facing seats CANNOT be
used . See diagram below .