Bravetti KB305H - Manual (Page 4)

3
OPERATING INSTRUCTIONS
700 Watt Power Unit
The 700 Watt Power Unit operates on
120V~, 60Hz. electrical power. Never
allow the power unit to become wet when
plugged into an electrical outlet.
Warning: The power unit should never
be immersed in water.
Caution: Make sure that the power
unit is unplugged from power source
and the blades have stopped turning
before attaching or removing any
accessory.
The Bravetti Blender is an indispensable kitchen tool for blending, chopping or
pureeing when preparing your favorite recipes. For best results, be sure to carefully read
all the instructions contained in this book before using this appliance.
Important: Do NOT operate the appliance
when empty as it could damage the power
base.
Assembling the Blender
Caution - Blades are sharp. Use extreme
caution when handling the blade
assembly, always hold it by the base of
the blade assembly. (Fig. 1) NEVER
HANDLE BY BLADES, VERY SHARP. Do
not immerse the power base in water or
any other liquid.
Fig. 1
Glass Blender Jar Assembly
1. Place jar upside down on a flat level
surface. (Fig. 2)
2. Place the rubber gasket on the rim of
the blender jar. (Fig. 2)
3. Holding the blade assembly by the
base, place it carefully over the rubber
gasket. (Fig. 2)
4. Place the retainer ring over the base of
the blade assembly and screw on
tightly. (Fig. 2)
5. Before placing the assembled blender
jar on the power base, make sure that
the unit is not plugged in and that the
speed control dial is in the "OFF"
position. (Fig. 3)
Fig. 2
Rubber Gasket
Blade Assembly
Retainer Ring
Blender Jar
Fig. 3
How to Use Your Blender
Caution - Blades are sharp. Use
extreme caution when handling the
blade assembly, always hold it by the
base of the blade assembly. (Fig. 1) Do
not immerse the power base in water or
any other liquid.
4
OPERATING INSTRUCTIONS
Caution: Make sure that the power
unit is unplugged from power source
and the blades have stopped turning
before attaching or removing any
accessory.
Important: Do NOT operate the appliance
when empty.
1. Place the power base on a dry, level
surface.
2. Make sure that the On/Off-Variable
Speed Control Dial is in the "OFF"
position.
3. Place the blender
jar into position on
the power base.
(Fig. 4)
4. Plug the power
cord into the
electrical outlet.
5. Add ingredients
to the blender jar
as directed by your recipe.
6. Place the blender jar
cover on the blender
jar with the measuring
cap in place. Make
sure that the measuring cap is securely
in place by turning it clockwise to lock.
Always hold the measuring cap firmly
in place during processing so that it
does not come loose.
7. If you need to add additional
ingredients while the blender is
processing, just remove the measuring
cap and pour the ingredients in through
the opening in the blender jar cover.
8. Turn the variable speed control dial
clockwise until the desired speed is
reached. Speed may be varied during
processing.
9. After use, always turn the unit to the
"Off" position and unplug the power
cord from the electrical outlet before
removing the blender jar from the
power base.
CAUTION: NEVER REMOVE THE
BLENDER JAR FROM THE POWER
BASE WHILE THE BLENDER IS STILL
RUNNING.
Fig. 4
Progressive Variable Speed Control
Caution: When working with hot foods
or liquids, always remove the
measuring cap from the blender jar
cover to vent the steam. Keep hands
and other exposed skin away from the
opening to prevent possible burns or
scalding. Do not use more than two (2)
cups of hot liquid at a time.
Pulse Function
Use the Pulse function when you need
an extra burst of speed but only when
you are below the "MAX" (maximum)
speed level.
You can use the Pulse function to
crush ice, but ice may also be crushed
at lower speeds as well. Crush only
about 8-10 oz. of ice at a time.
To clean the blender, fill the blender
with warm water and a drop of
dishwashing liquid and pulse a few
times and then remove the blender jar
from the power base and rinse the
blender jar.
Note: Always turn appliance to the
"Off" position after use and
unplug the power base.
To remove the blender jar,
lift it straight up; there is no
need to twist it.
Due to differences in
amounts and desired
consistencies of some
processed foods, a higher or
lower speed may be
required.
The Bravetti Quad-Blade Blender is
equipped with a progressive variable
speed control. It gives the user the
ability to increase or decrease the
processing speed easily during use.
decrease
increase