Liebherr LRH 600 - Manual (Page 7)

7
Liebherr Piling Rig LRH 100
Thanks to the special leader kinematics of the LRH 100 very large radii of up to 8.75 m and inclinations
of up to 18° in all directions are achieved. Thus, a complete pile group can be installed from one location
without repositioning the carrier machine.
The rig can be transported in one piece with the hammer mounted and is consequently ready for operation on the
jobsite in a much shorter period of time. With a transport length of 16.5 m and a height of 3.4 m, the unit's transport
weight is only 66 t. The compact design of the basic machine with merely 3 m transport width allows for quick and
cost-effective transportation.
The fl exible hammer design of the LRH 100 offers the possibility of mounting drop weights between 2.5 t and 7 t.
This guarantees optimum adaptation to the required pile type, whether it is a timber pile, concrete pile or a heavy
steel pile.
2