Changing over door hinges – Liebherr GGv 5060 User Manual
Page 7
Advertising
13
GB
Changing over door hinges
4. Transfer lower hinge bracket
and cover plate to the op-
posite side.
1. Remove screw from lower
hinge bracket.
2. Lift door, tilt to the right and
remove.
5. Turn lower hinge pin through
180° and remove.
6. Insert pin on the opposite
side and turn through 180°.
3. Transfer upper hinge com-
ponents to the opposite side.
7. Locate door on upper pin.
8. Tilt door inwards from the left.
9
. Secure hinge pin with screw.
10. Transfer handle and plugs
to the opposite side of the
door.
Advertising