Liebherr HS 8300 HD Hybrid - Manual (Page 2)

2 HS 8300 HD
Dimensions
Basic machine with undercarriage
9545
3855
7915
2200
3655
13300
3620
2390
5950
21650
8250 3030
1200
7150 640
2180
3980 R 10950
R 7835
Operating weight
The operating weight includes the basic machine with HD under-
carriage, 2 main winches 500 kN including wire ropes (250 m) and
20 m main boom, consisting of A–frame, boom foot (10 m) and boom
head (10 m), 78.7 t basic counterweight, 1200 mm track pads and
50 t hook block.
Total weight approx. 352 t
Ground pressure
Ground bearing pressure 1.85 kg/cm 2
Equipment
Main boom (No. 2724.32) max. length 68 m
Modular designed equipment for operation as crane, with dragline or
clamshell.
For dragline operation, a rotating fairlead is fi tted into the boom foot.
This minimizes the rope angle to drum, which results in lower rope
wear.
Remarks
1. The lifting capacities stated are valid for lifting operation only
(corresponding with crane classifi cation according to F.E.M.
1.001, crane group A1).
2. Crane standing on fi rm, horizontal ground.
3. The weight of the lifting device (hoisting ropes, hook block,
shackle etc.) must be deducted from the gross lifting capacity
to obtain a net lifting value.
4. Additional equipment on boom (e.g. boom walkways, auxiliary
jib) must be deducted to get the net lifting capacity.
5. For max. wind speed please refer to lift chart in operator‘s cab
or manual.
6. Working radii are measured from centre of swing and under
load.
7. The lifting capacities are valid for 360 degrees of swing.
8. Calculation of stability under load is based on ISO 4305
Table 1 + 2, tipping angle 4°.
9. The structures are calculated according to F.E.M. 1.001 - 1998
(EN 13001-2 / 2004).