Liebherr WKr 3211 Vinothek User Manual

Page 9

Advertising
background image

17

13

GB

10. Unscrew hinge bracket.
11. Remote the cover, turn it through 180°

and re-fit it on the opposite side.

12. Screw hinge bracket into place.

13. Insert the pin into the left-hand door mounting.

Use your index finger to hold the pin while you are

assembling the door.

14. Locate the door on the upper pin as

shown in the illustration and guide it

to the lower hinge bracket.

Important

As a result of its heavy weight, the door

on models WKr 3212 and WKr 4212 must

be held secure by one person.

15. Lift the door upwards and turn the

pin until it fits into the bore hole of

the hinge bracket.

Slowly lower the door downwards.

The lower part of the pin must be

fully engaged in the bore hole of

the hinge bracket.

16. Screw the screw into the

pin again and tighten.

Shutting your appliance down

If your appliance is to be shut down for any length of time, switch

it off and disconnect the plug or switch off or unscrew the fuse.

Clean the appliance and leave the door open in order to prevent

unpleasant smells.

The appliance complies with the relevant safety regulations and

EC Directives 2004/108/EC and 2006/95/EC.

16

14

15

10

12

11

18

17

Adjusting the lateral tilt of the door

If the door is at an angle, adjust the angle.

17. Remove middle screw from hinge bracket.

This screw is no longer needed.

18. Undo screws and slide hinge

bracket to the right or left.

Tighten screws.

Advertising
This manual is related to the following products: