10icemaker, Control – Liebherr ICN 3366 Premium NoFrost User Manual

Page 9

Advertising
background image

5.5.10 IceMaker*

The IceMaker and the water reservoir situated in the refriger-

ator compartment can be used to produce ice cubes or to

provide chilled drinking water.
The IceMaker is in the top drawer of the freezer compartment.

The drawer is marked "IceMaker".
Make certain that the following conditions are met:

-

The appliance is level.

-

The appliance is connected.

-

The freezer compartment is switched on.

-

The water tank was cleaned with water and is filled.

Switching on the IceMaker*

Fig. 9

u

Pull out the drawer.

u

Press the On/Off button

Fig. 9 (1)

so that the LED

Fig. 9 (2)

shines.

u

Push in the drawer.

w

The IceMaker symbol

Fig. 2 (19)

shines.

Note

u

The IceMaker produces ice cubes only if the drawer is fully

closed.

Producing ice cubes*
The production capacity depends on the freezer temperature.

The lower the temperature, the more ice cubes can be

produced in a specific period.
The ice cubes drop from the IceMaker into the drawer. When a

certain filling level has been reached, no further ice cubes are

produced. The IceMaker does not fill the drawer right up to the

brim.
If large quantities of ice cubes are needed, the complete

IceMaker drawer can be exchanged for the adjacent drawer.

When the drawer is closed, the IceMaker automatically re-

commences production.
Once the IceMaker has been switched on for the first time, it

may take up to 24 hours until the first ice cubes are produced.

Note

When the appliance is used for the first time and if it has been

out of use for a long time, particles may collect in the IceMaker

and/or water conduit.

u

Therefore do not use or consume the ice cubes made in the

first 24 hours.

Filling the water tank*
NOTICE

Risk of damage to the IceMaker!

Liquids containing sugar, such as soft drinks, fruit juices or

similar, gum up the pump and therefore lead to total pump

failure and, as a consequence, to damage to the IceMaker.

u

Only fill the water tank with drinking water or carbonated

drinking water (mineral water, soda)! Do not use liquids

containing sugar, such as soft drinks, fruit juices or similar!

WARNING

Risk of poisoning!

u

The water quality must comply with the drinking water regu-

lations of the country in which the appliance is operating

(e.g. 98/83/EU).

u

The IceMaker is solely intended to produce ice cubes in

quantities customary for household use and must be oper-

ated using water appropriate for this purpose.

u

If the IceMaker is switched off or not used for a longer period

of time, empty the water tank.

Note

The use of filtered, de-carbonated water ensures the supply of

drinking water with top quality flavour for problem-free ice cube

production.

You can achieve this water quality by using a table-top water

filter available from specialist shops.

u

Use only filtered, de-carbonated water to fill the water tank.

The IceMaker is supplied with water from a water tank in the

refrigerator compartment (see Appliance at a glance).
When the water tank is empty, the water tank symbol

Fig. 2 (20)

shines.

Before initial operation:

u

clean the water tank thoroughly with water to remove any

dust etc.

Fig. 10

u

Pull the water tank forwards.

u

Remove cover and fill tank with water.

u

Replace the lid, put the filled water tank back into the holder

and push it right to the back.

Note

u

The water reservoir has to be slid all the way into the bracket

provided for the purpose in the refrigerator compartment!

Setting the water intake time*
The opening time of the IceMaker valve can be set to affect the

size of the ice cubes produced.
The water intake time can be set in stages from

E1

(short intake

time) to

E8

(long intake time). The intake is preset at

E3

.

u

To activate the setting mode: press the SuperFrost button

Fig. 2 (13)

for about 5 s.

w The display indicates

c

.

w

Themenu symbol

Fig. 2 (17)

shines.

u

Using the Up setting button, freezer compartment

Fig. 2 (11)

and Down setting button, freezer compartment

Fig. 2 (12)

select

E

.

u

To confirm: briefly press the SuperFrost button

Fig. 2 (13)

.

u

To increase the water intake time: press the Up

setting button, freezer compartment

Fig. 2 (11)

.

u

To reduce the water intake time: press the Down

setting button, freezer compartment

Fig. 2 (12)

.

u

To confirm: press the SuperFrost button

Fig. 2 (13)

.

u

To deactivate the setting mode: press the On/Off button,

freezer compartment

Fig. 2 (9)

.

-or-

u

Wait for 5 minutes.

Control

* Depending on model and options

9

Advertising