3thawing food, 4shelves, 6maintenance – Liebherr CTPsl 2521 Comfort User Manual

Page 9: 1manual defrosting, 2cleaning the appliance, 3changing the interior light, 6 maintenance, Maintenance, 1 manual defrosting, 2 cleaning the appliance

Advertising
background image

5.2.3 Thawing food

- in the refrigerator compartment

- in a microwave oven

- in a conventional or fan oven

- at room temperature

u

Remove only as much food as is required. Use thawed food

as quickly as possible.

u

Food once thawed should be re-frozen only in exceptional

cases.

5.2.4 Shelves

u

To remove the shelf: lift up

at the front and pull out.

u

To put the shelf back:

simply push in as far as it

will go.

6 Maintenance

6.1 Manual defrosting

The refrigerator compartment is defrosted automatically.

The defrost water evaporates as a result of the heat of the

compressor. Drops of water on the rear wall are perfectly

normal.

u

Regularly clean the drain opening to allow the water to flow

away (see 6.2) .

A layer of frost or ice can build up in the freezer compartment

after a long period of operation.
The layer of frost or ice builds up faster if the appliance is

opened often or if the food is warm when placed inside.

However, a thick layer of ice will increase the appliance‘s

energy consumption. You should therefore defrost the appli-

ance regularly.

CAUTION

Risk of injury and damage as a result of hot steam!

u

Do not use electric heaters or steam cleaners, naked flames

or defrosting sprays for defrosting.

u

Do not remove ice using sharp instruments.

u

Switch off the appliance.

u

Pull out the power plug or switch off the fuse.

u

Place a pan with hot, not boiling

water on a middle shelf.

w

Defrosting is speeded up.

u

Leave the door of the appliance open while defrosting.

u

Remove detached pieces of ice.

u

If necessary, pick up defrost water several times, using a

sponge or cloth.

u

Clean the appliance (see 6.2) .

6.2 Cleaning the appliance

WARNING

Risk of injury and damage as a result of hot steam!

Hot steam can lead to burns and can damage the surfaces.

u

Do not use any steam cleaners!

NOTICE

Incorrect cleaning damages the appliance!

u

Do not use cleaning agents in concentrated form.

u

Do not use any scouring or abrasive sponges or steel wool.

u

Please do not use any aggressive, scouring, sand-,

chloride-, chemical- or acid-based cleaning agents.

u

Do not use chemical solvents.

u

Do not damage or remove the type plate on the inside of the

appliance. It is important for the customer service.

u

Do not pull off, bend or damage cables or other compo-

nents.

u

Do not allow any cleaning water to enter the drain channel,

ventilation grille or electrical parts.

u

Please use soft cleaning cloths and a universal pH-neutral

cleaning agent.

u

Please use cleaning and care products suitable for contact

with foodstuffs in the appliance interior.

u

Empty appliance.

u

Pull out the power plug.

u

Clean plastic outer and inner surfaces with lukewarm

water and a little washing-up liquid.

NOTICE

The stainless steel doors are finished with a high quality

surface coating and must not be treated with the enclosed care

product,

as otherwise the surface coating will be damaged.

u

Please only use a soft clean cloth to wipe the coated door

surfaces. In the case of heavy soiling, use a little water or

neutral cleaning agent. A micro-fibre cloth can be used

optionally.

u

When soiled, clean stainless steel side walls with a

commercially available stainless steel cleaning agent. Then

apply the enclosed stainless steel care product evenly in the

direction of polishing.

u

Use only a soft clean cloth to wipe side walls and door

surfaces with a paint finish. In the case of heavy soiling, use

a little water or neutral cleaning agent. A micro-fibre cloth

can be used optionally.

u

Clean drain hole: Remove deposits

with a narrow instrument, e.g. a

cotton bud.

u

Clean items of equipment by hand with lukewarm water

and a little washing-up liquid.

After cleaning:

u

Wipe dry the appliance and items of equipment.

u

Connect the appliance and switch it on again.

When the temperature is sufficiently cold:

u

Put the food back inside.

6.3 Changing the interior light

In the device, an LED lamp is used as standard illumination for

the interior space.

Maintenance

* Depending on model and options

9

Advertising
This manual is related to the following products: