Switching the appliance on an off, Setting the temperature, Fan switch – Liebherr WKes 653 Grand Cru User Manual

Page 6

Advertising
background image

20

Switching the appliance on an off

Switching on: Press the On/Off button so that
the temperature display lights up/flashes.

Switching off: Press the On/Off button for
approx. 3 seconds so that the temperature
display goes out.

Setting the temperature

To reduce the temperature:
Press the Down button.
To increase the temperature:
Press the Up button.
- While you are entering the temperature, the

set temperature will flash on the display.

- You can change the settings in increments of

1°C briefly pressing the button again.

- The electronic controls will switch over automatically about 5 seconds after the last

time you pressed the button, and the actual temperature will be displayed.

The temperature can be set between +5°C and +20°C.

Fan switch

Thereby a climate which corresponds to that of a wine cellar is achieved inside the ap-
pliance. Corks are prevented from drying out due to an increased level of humidity.

Switching on: Press the Ventilation button.
The symbol will light up.

Switching off: Press the Ventilation button
again. The symbol will go out.

Advertising