Liebherr ECBN 5066 PremiumPlus BioFresh NoFrost - Manual (Page 9)

GB
Removing the BioFresh drawer
Pull the drawer straight out,
grip at the back and lift out.
Inserting the BioFresh
drawer
Place the drawer on the pull-
out rails. The rails must be
fully extended and aligned
with the front of the drawer.
Slide the drawer in.
Repositioning the shelves
1. Hold the shelf underneath
with your hand to prevent
from tipping down back-
wards when removing.
2. Lift the shelf at the front.
3. Pull the shelf towards you
until the round cutout of
the shelf is in line with the
interior light cover.
4. Lift the shelf up and replace
in the desired position.
Removing the shelves
1. Follow the first three steps
in the chapter above.
2. Move the shelf down and
stop just over the vegeta-
ble drawer.
3. Move the front of the shelf
upwards until the shelf is
in a vertical position.
4. Turn the shelf by 90° and
remove.
Equipment
Repositioning the door racks
Lift door rack vertically, lift out to
the front and re-insert at a different
height, following these steps in the
reverse order.
Light cover
Bottle shelf
The shelf above the BioFresh
drawers can be used for stor-
ing bottles horizontally.
Remove the glass plate and
insert it under the shelf plate.
The recesses in the shelf plate
ensure that the bottles are
stored securely.
When storing tall bottles, the
bottom door rack must be
moved further up.
By shifting the bottle holder you
can protect the bottles from falling
over when opening or closing the
door.
Removing the bottle holder
Lift the bottle holder vertically at the
front (1), move backwards (2) and
remove.
= Confirm dust filter cleaning
Once the dust filter in the appliance plinth has been cleaned, the
dust filter LED in the display must be cancelled.
Cancelling the dust filter symbol
• Activate setup mode by touching the SuperFrost icon for
5 seconds.
• Touch the freezer compartment Down icon until appears in
the display.
• Touch the SuperFrost icon.
- The display reads
• Touch the SuperFrost icon.
- The display reads
• The dust filter symbol has been cancelled.
• Exit setup mode by touching
the freezer compartment On/Off icon.
23