Bushnell WEATHERFX 950070C - Manual (Page 6)

Q:
What does mean?
A:
The low battery indicator will flash on the display when the batteries are low and need
to be replaced. Note: Low power may cause erratic behavior and inaccurate information.
Q:
I turned on my SkiFX and the screen is totally blank.
A:
Your device will be blank until it receives its first update from our network. If this continues
for more than six hours, try moving your SkiFX to another location where you can receive
a stronger signal, as shown on the signal strength indicator.
Q:
I don’t see any bars next to the signal strength indicator.
A:
Your SkiFX is located in an area with poor reception. Try moving your unit closer
to a window or upstairs. If your SkiFX still doesn’t show any signal bars, go to
www.bushnell.com/weatherfx/ski.html to verify that your location is within
signal coverage.
Note: Full signal strength will help improve and sustain battery life.
Q:
The time on the clock display is off by one or more hours.
A:
Press the Zone button on top of the device until your proper time zone appears.
Your SkiFX should maintain accurate time from the network without further adjustments.
Q:
Will this device work outside the United States?
A:
At the present time, network coverage is only supported within the United States
For additional troubleshooting tips and FAQ, please visit
www.bushnell.com/weatherfx/ski.html
Mountain Indicator
Mountain Display
Today’s Forecasted Weather Conditions Mountain Data
Today’s Forecasted
High and Lo Temperature
Signal Strength Indicator
Current Time
Day of the week
Surface Conditions
New Snow Last 24 Hours
Current Temperature
Region indicator Wind-chill indicator
High Index UV Indicator Favorites Indicator
No Coverage Indicator
Network Found Indicator Temperature Rising or Falling Indicator
Low Battery