BT Hub Phone 1010 - Manual (Page 35)

Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
Call Waiting
Providing you have subscribed to your network provider’s
Call Waiting service, you will hear a soft beep every 5
seconds if an incoming call arrives while you are already
on the phone. This beep is not audible to the person you
are speaking to. The second caller’s number (or name if
a phonebook match is found) will appear on the handset
display.
Instead of the engaged tone, the second caller will hear
an announcement asking them to hold the line.
Speak to a second caller
1. Press to answer the second call and put your
current caller on hold. Press again to return to your
first caller and to switch between both callers.
Or
2. If you want to end the current call and pick up the
waiting call, press . The handset will ring. Press
again to connect to the waiting caller.
The second caller is only charged
from the second you answer, not
while they are waiting to be
connected.
Caller Display and the calls list 35
Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 35