Billy Goat KD612 - Manual (Page 8)

Part No 890033 Form No F091207A 8
KD Owner’s Manual
PACKING CHECKLIST
Your Billy Goat KD Vacuum is shipped from the factory in one carton, completely assembled except for the
upper handle, debris bag, and bag quick disconnect.
PUT OIL IN ENGINE BEFORE STARTING
ASSEMBLY
READ all safety instructions before assembling unit.
TAKE CAUTION
when removing the unit from the box the Handle Assembly is attached by
cables and folded over
1. ASSEMBLE Lift upper handle (item 6), remove items 8, 30, & 32 from lower handle (item 27). Attach and secure
upper handle as shown using same hardware.
2. UNFOLD the debris bag (item 1) and fasten bag neck to bag quick disconnect (item 64). Attach firmly to housing
exhaust (item 52) see fig. 2.
3. ATTACH bag hanger strap to bag supports (item 11), preassembled to upper handle.
4. CONNECT spark plug wire.
Boxing Parts
Checklist
Debris Bag
P/N-890022
Literature Assy
P/N-890392
Connector Quick
Disconnect
P/N-890176
Honda 5.5GVC
160
Briggs & Stratton
6.0 HP Intek
PARTS BAG &
LITERATURE ASSY
Warranty card P/N- 400972, Owner’s Manual P/N-890033, Declaration of Conformity P/N-890393.