Blaupunkt 7" IVMS-7001 - Manual (Page 6)

16
FITTING/REMOVAL
➮
Insert the monitor to check that it
will fit into the cut area, and make
adjustments if necessary.
Lay the cable through the
headrest
➮
Now pass the supplied cables
through the opening so that they
emerge from the underneath of the
headrest.
➮
If possible, cover the cable with a
cable tunnel.
➮
Now connect the power supply,
ground and video signal cables, to
check that the monitor is working.
Insert the mounting frame in the
headrest
➮
Before connecting the monitor,
pass the connecting cables
through the holes provided in the
mounting plate, as shown in the il-
lustration.
➮
Insert the mounting plate into the
area that has been cut out, and fix
it in place with appropriate fasten-
ings.
Monitor
Mounting plate
Inserting the monitor
➮
Before connecting the monitor,
pass the connecting cables
through the holes provided in the
mounting plate, as shown in the il-
lustration.
➮
Insert the monitor into the mounting
plate, and attach it with appropriate
fastenings.