Beltronics LP904 - Manual (Page 2)

Congratulations on your
purchase of BEL LaserPro
™ 904.
BEL LaserPro ™ 904
is designed as the ultimate in
traffic Laser defense given that it
produces countermeasures
beyond the function of
traditional Laser detectors by
blocking the Laser beam that is
targeted at your vehicle.
LaserPro ™ 904 is comprised
of sophisticated, exterior
mounted front and rear Laser
transceivers. You can operate
LaserPro
™ 904 as a stand-alone
unit, and know you’re protected
beyond traditional “Laser
detectors”, or you can
supplement LaserPro
™ 904’s
capabilities with a dash or
Remote Installation
Radar/Laser/Safety detector
from BELTRONICS.
Please Note:
Operating BEL LaserPro
™ 904 is
not a license to speed. Observe
the local speed limits and laws
governing the user of a Laser
defense product. Use of
LaserPro
™ 904 is prohibited in
some states. Check your local
and state laws before use or call
BELTRONICS:800-939-7373.
The Three transceivers of
LaserPro
™ 904 must have a
clear view of the road in front
and behind, and must be
installed level to the road in
order to work properly. Ensure
your BEL LaserPro
™ 904 is
correctly positioned after it is
installed.
IMPORTANT Notice
It is recommended that
LaserPro
™ 904 be professionally
installed. New car dealers, and
many reputable auto shops or
car stereo stores should be able
to install LaserPro
™ 904. Call
BEL toll-free at 800-737-9393,
for the name of an authorized
dealer near you.
Installing LaserPro
™ 904 without
expertise in automotive
electronic installations could
cause personal injury, or damage
to the unit or your vehicle. If
your vehicle is damaged during
installation, its safety systems
may be compromised, which
could cause personal injury or
property damage.
Congratulations and Important Notice
2
8804_LaserPro904Manual 5/2/02 1:24 PM Page 2 Rev 7 Mac