Brinkmann Emperor Solar Garden Accent Lights - Manual (Page 6)

Top Housing
Lens
Battery
Changing Battery
Step 1
Remove lens from top housing by
turning lens clockwise.
Step 2
With top housing upside down (solar
panel facing down), push battery
compartment tab and lift off battery
compartment lid.
Step 3
Remove battery. Replace with new Ni-Cd
rechargeable battery.
Step 4
Replace battery compartment lid.
Step 5
Attach the lens by aligning the tabs with
the slots in top housing. Turn counter-
clockwise to lock in place.
NOTE: These lights utilize L.E.D. (Light
Emitting Diode) technology. There
are no bulbs to replace.
Top Housing
Battery
Compartment Lid
It is important that the solar panel is kept free
of dirt and debris. A dirty solar panel will not
allow the battery to fully charge. This will
shorten the life of the battery and cause the
light to malfunction. Clean regularly with a
dampened cloth or paper towel.
Cleaning
5
Tabs
IMPORTANT: The EPA Certified RBRC ® Battery Recycling Seal on
the nickel-cadmium (Ni-Cd) battery contained in our product
indicates The Brinkmann Corporation is voluntarily participating
in an industry program to collect and recycle these batteries at
the end of their useful life, when taken out of service in the
United States or Canada. The RBRC
® program provides a
convenient alternative to placing used Ni-Cd batteries into the
trash or the municipal waste stream, which may be illegal in your area. Please call
1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal
bans/restrictions in your area. The Brinkmann Corporation’s involvement in this
program is part of our commitment to preserving our environment and conserving our
natural resources.