Badger Basket Cherry Doll Changing Table 01867 - Manual (Page 4)

1.0/0908/TG Page 4 of 4
A
B
C
B
C
D
D
PICTURE 1
A
B
B
C
C
A
E
F
G
H
H
I
I
J
PICTURE 2
PICTURE 3
PICTURE 4
STEP 1: See PICTURE 1. Attach the TWO BOTTOM RAILS (B), with the grooves facing in, and the TWO TOP RAILS (C)
to ONE SIDE FRAME (A) using FOUR LONG BOLTS (D). The countersunk holes on the side frames face out so the heads of
the bolts will be concealed.
STEP 2: See PICTURE 2. Slide the BOTTOM PANEL (E) into the grooves on the BOTTOM RAILS (B) with the white side
facing up. Next, attach the second SIDE FRAME (A) to the TWO BOTTOM RAILS (B) and the TWO TOP RAILS (C) using
FOUR LONG BOLTS (D).
STEP 3: See PICTURE 3. Position the TOP PANEL (F) and line up the two holes. Secure the top panel to the SIDE FRAMES
(A) using the TWO SHORT BOLTS (G).
STEP 4: See PICTURE 4: Unfold the BASKETS (H) and place the BASKET BOTTOMS (I) inside. Place the baskets on the
bottom panel; and place the PAD (J) onto the top panel.