Breville SG820 - Manual (Page 4)

6
Your Sandwich Press features an Adjustable
Toast Height Control feature which allows
you to fix the top plate to a range of positions
above the bottom plate. This allows your
Sandwich Press to be used as an open
toaster ideal for toasting open sandwich
style ‘melts’. It can also be used for toasting
sandwiches and snacks where you don’t
need to apply the weight of the top plate.
1. Allow the Sandwich Press to preheat until
the green ‘READY’ light illuminates.
2. Place sandwich to be melted on
bottom plate.
3. Move the Toast Height Control clip on the
right hand side of the Sandwich Press to
the desired height (see fig 2).
4. Slowly lower the top plate until it rests on
the height control clip.
5. The top plate will radiate the desired heat
to melt ingredients such as cheese.
6. Toasting ‘melts’ should take
approximately 3-4 minutes. However
exact toasting time will be a matter of
taste. It will also depend on the height of
the top plate.
TOASTING OPEN SANDWICH ‘MELTS’
7
OPERATING YOUR BREVILLE SANDWICH PRESS
BEFORE USE
Remove any promotional labels and/or
stickers from Sandwich Press before use.
Check that the cooking plates are clean
and free of dust. If necessary, wipe over with
a damp cloth.
Place on a flat, level surface. Slide
storage clip on the left hand side of the
Sandwich Press handle backwards for the
open position. Ensure the Sandwich Press is
in the closed position for pre-heating.
1. Insert the plug into a 230/240v power
outlet and turn the power ‘On’. The red
power ‘ON’ light will illuminate.
2. Allow the Sandwich Press to preheat in
the closed position until the green
‘READY’ light illuminates.
3. During this time, prepare the sandwich
and place it onto the bottom cooking
plate. Always place sandwiches towards
the rear of the bottom cooking plate.
4. Close the top cooking plate which has a
floating hinge that is designed to evenly
press down on the sandwich (see fig 1).
5. Toasting should take approximately 5-8
minutes. Exact toasting time will be a
matter of taste. It will also depend on the
type of bread and type of filling used.
8. When the sandwich is cooked, open the
lid. Remove it with the help of a plastic or
wooden spatula. Never use metal tongs
or a knife as these can cause damage to
the non-stick coating.
The storage clip should not
be used to clamp down the
top plate when the
sandwiches are in the
Sandwich Press. The
weight of the top cooking
plate will gradually press
down the sandwich during
the cooking process.
The Toast Height Control
can be moved to
accommodate thick or thin
melts by sliding the clip
forwards or backwards
along the arm.
Always allow the Sandwich
Press to preheat until
the green ‘READY’
light illuminates.
When using the Breville
Sandwich Press for the first
time you may notice a fine
smoke haze. This is caused
by the heating of some of
the components. There is
no need for concern.
fig 2
fig 1
FULLY UNWIND THE CORD FROM THE CORD STORAGE
FACILITY BEFORE USE.
BR3994 SG620/SG820 book 13/1/04 5:03 PM Page 6