Beko LG-BKE 4600 D - Manual (Page 9)

9
Safety Precautions
Operating Instructions
Care and Maintenance
Troubleshooting Tips
Beep, Beep Beep, Beep
TIME OFF hr.
TEMP.
TEMP.
TIME OFF hr.
TIME OFF hr.
TEMP.
TEMP.
TIME OFF hr. TIME OFF hr.
TEMP.
TIME OFF hr.
TEMP.
Cooling Healthy
Dehumidification
Heating
(Heat pump model only)
To raise the temperature
To lower the temperature
Press the OFF Time Button.
1. Press the OFF Time Button.
2. Check the OFF Time LED of the room air conditioner.
3. The Timer is programmed by 1 hour each
pressing the OFF Time button from 1 hour to 7 hours.
OFF Timer control Setting
OFF TIMER CONTROL SETTING
Press the Start/Stop button.
The unit will respond with
a beep.
To select Heating Operation, press the Operation Mode
Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
Set the temperature higher than the room temperature.
The temperature can be set within a range of 16°C~30°C in
1°C increments.
Set the fan speed again with the door of the
remote control still closed. You can select
the fan speed in four steps–low, medium,
high, or CHAOS. Each time the button is
pressed, the fan speed mode is shifted.
Heating Operation(Heat pump model only)
1
2
3
4
TIME hr.