Bluetake Technology BT400 G5 - Manual (Page 10)

10
NOTICE!! You must pair the headset with a Bluetooth
®
phone before you can use the
headset!
- Pair Your Headset and Cell Phone -
Step 1 > Please make sure the headset is turned OFF.
Step 2 > Press and hold the < POWER/MUTE > button approximately 7 seconds until the
headset indicator LED starts to blink BLUE and RED color.
Step 3 > Release the < POWER/MUTE > button when the indicator LED is flashing
Step 4 > Follow the operating instruction for your Bluetooth phone to start a pairing progress.
Step 5 > The phone’s display will indicate that it found one or more Bluetooth devices, the
“BT400 G5” should be included in the list, please select it for pairing.
Step 6 > The phone’s display then prompts you for a pairing passkey or PIN, please enter four
zeros “ 0000 ”.
Step 7 > When the pairing progress is completed successfully, the headset indicator LED will
return to normal status of blinking BLUE .
Step 8 > Some phone’s display may ask you whether you want to change the headset’s name;
you can replace the “BT400 G5” with any name you prefer.
- Wearing Your Headset with Best Performance -
For optimal performance, wear the headset and your Bluetooth mobile phone on the same side
of your body. In regular situation, the sound performance is excellent when there’s no any
obstruction between the headset and the Bluetooth mobile phone.