Mportant safety instructions, Warning, Save these instructions – Bissell PROHEAT 1425 User Manual

Page 3: Grounding instructions

Advertising
background image

3

I

MPORTANT SAFETY INSTRUCTIONS

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

When using an electrical appliance, basic precautions

should be observed, including the following:
Read all instructions before using your AuTo cARE

®

WARNING:

To reduce

the risk of fire, electric shock, or injury:

Do not use for any purpose other than described

in this user’s Guide.

use only BISSELL cleaning products intended

for use in this appliance.

use only manufacturer’s recommended attach-

ments.

Do not expose to rain, store indoors.

Do not handle

Auto Care

®

ProHeat plug or

appliance with wet hands.

Do not leave

Auto Care

®

ProHeat when it is plugged in.

Do not put any object into appliance openings or

use with blocked openings. Keep free of dust, lint,

hair, and anything that may reduce air flow.

Do not expose hair, loose clothing, fingers or

body parts to openings or moving parts.

Keep appliance on a level surface.

Be extra careful when cleaning stairs.

Do not carry the appliance while in use.

Never spray at people or animals.

Do not allow to be used as a toy. close attention is

necessary when used by or near children.

Do not pick up hot or burning objects.

Do not pick up flammable or combustible materials

(lighter fluid, gasoline, kerosene, etc.) or use in the

presence of explosive liquids or vapor.

Do not pick up toxic material (chlorine bleach,

ammonia, drain cleaner, gasoline, etc.).

Do not use appliance in an enclosed space filled with

vapors given off by oil base paint, paint thinner, some

moth proofing substances, flammable dust, or other

explosive or toxic vapors.

Do not pull or carry by cord, use cord as a

handle, close door on cord, pull cord around

sharp corners or edges, run appliance over cord,

or expose cord to heated surfaces.

Do not use with damaged cord or plug.

Turn off all controls before unplugging.

unplug before attaching the TurboBrush.

unplug from outlet when not in use and before

conducting maintenance and troubleshooting.

Do not use

Auto Care

®

ProHeat if it has been

dropped, damaged, left outdoors or dropped into

water. Have it repaired at an Authorized Service

center.

unplug by grasping the plug, not the cord. Do not

unplug by pulling on cord.

Always connect to a properly grounded outlet; see

grounding instructions.

Do not modify the 3-prong grounded plug.

SAVE THESE

INSTRUCTIONS

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded

wiring system. If it should malfunction or break

down, grounding provides a safe path of least

resistance for electrical current, reducing the risk of

electrical shock. The cord for this appliance has an

equipment-grounding conductor and a grounding

plug. It must only be plugged into an outlet that is

properly installed and grounded in accordance with

all local codes and ordinances.

WARNING:

Improper

connection of the equipment-

grounding conductor can result in a risk

of electrical shock. Check with a quali-

fied electrician or service person if you

aren’t sure if the outlet is properly

grounded. DO NOT MODIFY THE PLUG.

If it will not fit the outlet, have a

proper outlet installed by a qualified

electrician. This appliance is designed

for use on a nominal 120-volt circuit,

and has a grounding attachment plug

that looks like the plug in the drawing

above. Make certain that the appliance

is connected to an outlet having the

same configuration as the plug. No

plug adapter should be used with

this appliance.

This model is for household use only.

Grounded

Outlets

Grounding Pin

Advertising