Scanning all receivable stations (scan ), Receiving traffi c announcements – Blaupunkt HAMBURG MP57 User Manual

Page 24

Advertising
background image

85

Tuner mode

EN

GLISH

DEUT

SCH

FRAN

Ç

AIS

IT

ALIAN

O

NEDERLANDS

S

VENSKA

LO1" means it is set to the lowest sensitivi-
ty setting.

Set the desired sensitivity with the rock-
er switch or

=

.

Scanning all receivable stations
(SCAN )

You can scan all receivable stations of a
waveband. The scan time can be set as
described in the chapter "User settings".

Select the waveband (FM, MW, LW)
whose receivable stations you want to
scan.

Press and hold the

MENU/OK button

<

for approx. two seconds.

The display shows "SCAN". The tuner is
searching for stations.

As soon as the tuner has located a sta-
tion, it is played.

After a complete search of the frequency
band, scanning stops. The previously set
station is played.

You can do the following at any
time:

Store the currently scanned station
(press any station button

9

for approx.

two seconds)

Cancel the scan (briefl y pressing the
MENU/OK button

<

)

u

u

u

Receiving traffi c announcements

If you switch on the priority for traffi c an-
nouncements, the device uses the RDS serv-
ices TA (Traffi c Announcement) and EON
(Enhanced Other Networks). TA switches
traffi c reports even if you are currently lis-
tening to a different audio source. The vol-
ume for the traffi c announcement can be
adjusted (see the chapter "User settings",
section "Changing volume presettings").

If no traffi c information station is currently
defi ned, the RDS service EON ensures that
the device automatically changes to a traffi c
information station of the same broadcast-
ing network for the duration of a traffi c an-
nouncement.

Switching the priority of traffi c reports
on/off

The priority of traffi c reports is switched on
if the displays shows the

symbol. This

setting limits the station search and scan-
ning (SCAN) for traffi c information stations.

To switch the traffi c report priority on/off:

Press the

TRAF button

;

.

To search for traffi c information sta-
tions, start the station seek tuning.

Note:
For the device to switch through traffic
reports, a station must be defined that
supports TA or belongs to a broadcast-
ing network with traffi c information sta-
tions.

u
u

02_BA_Hamburg_gb.indd 85

02_BA_Hamburg_gb.indd 85

26.03.2007 11:34:04 Uhr

26.03.2007 11:34:04 Uhr

Advertising