Baracoda BLUETOOTH RS232RS232 User Manual
Page 5
Baracoda RS232 dongle Plug & Scan – User Guide v3.28.2
- 5 -
Data Capture
for Workforce
in Motion
2.
2.
2.
2.
Technical Introduction
Technical Introduction
Technical Introduction
Technical Introduction
2.1.
2.1.
2.1.
2.1.
Hardware description
Hardware description
Hardware description
Hardware description
Baracoda Serial Dongle has a 9-PIN SUB-D female (DCE) connector as shown in the Figure below.
Block diagram
3 ways available to power on the RS232 dongle Plug&Scan:
-
With its External Power Adaptor.
-
On the PIN9 of the RS232 connector if the Terminal gives 5V on this PIN.
-
With its USB Power Adapter (“option not included with the product, please contact our Sales
Department to buy this accessory).
Note: The 4 switchs available on the front casing are not used to configure the RS232 dongle adapter. So you
can let all switchs to OFF.