Philips 2-in-1-Kombigerät zur Luftreinigung u. -befeuchtung User Manual

Page 20

Advertising
background image

20 EN

Note

Make sure that the pre-filter is completely dry.
If it is still wet, bacteria may multiply in it and
shorten the lifetime of the pre-filter.

3

Mix the white vinegar with an equal

amount of tap water in a container that is

large enough to soak the humidification

filter in.

Note

White vinegar has 5% acetic acid.

If there are white deposits (limescale) on the
filter, make sure that the side with the white
deposits is immersed in the water.

4

Let the humidification filter soak in the

solution for one hour.

Water : Vinegar

1 : 1

1 Hour

5

Discard the water-vinegar solution.

6

Rinse the humidification filter under the

tap to rinse away vinegar residues. During

rinsing, turn the humidification filter so that

both the front and back sides are rinsed.

7

Let excess water drip off the

humidification filter and let it air dry.

8

After the pre-filter and humidification filter

are put back in the appliance, reset the

filter lifetime counter. (Refer to chapter 7

"Resetting the filter lifetime counter")

Advertising