Bunn JDF-2S - Manual (Page 5)

5
2. On Portion Control models, connect membrane
switches to Door Circuit Board.
4. Secure the door cover using 5 screws provided.
DOOR COVER INSTALLATION
1. Install door cover by first plugging the door harness connector into the machine harness connector located
at the bottom of the machine door.
P3577
P3579
JDF-2S
JDF-4S Shown
JDF-2S
JDF-4S
JDF-2S & JDF-4S
JDF-4S
P3578
P3577
P3840
3. Install door cover
44744 032811