Bosch D1260 - Manual (Page 7)

D1260/D1260B | Owner's Manual | Part I: Security system basics
Bosch Security Systems | 9/04 | 50410D 7
Part I: Security system basics
Using the keypad
Your security system provides quick access to functions
by pressing the
COMMAND key and one or two
additional keys.
D1260 D1260B
Another way to access functions is through the
Command Menu. To access the Command Menu,
press the soft key adjacent to
Menu> shown in the
display.
Pressing the <Previous or Next> soft key while in the
Menu List allows you to scroll up or down through the
list of functions programmed by your security
company.
Pressing the soft key adjacent to the function being
displayed initiates the function.
To exit the Command Menu, press the <Exit soft key.
Use the Command Menu to locate functions you don’t
use often or that don’t have a command number.
Command center keys
Table 1: D1260/D1260B Keypad keys
Key
D1260 D1260B
Name Description
COMMAND Use the COMMAND key in combination with one or two numeric keys to perform
a function
# ENTER The ENTER key is used to complete the entry of your passcode at the command
enter. Whenever a function requires that you enter your passcode at the keypad,
first press the digits of the code and then press the ENTER key. Your system will
not recognize your passcode until you press ENTER.
EXIT When Exit> or <Exit appears in the keypad display, pressing the soft key
adjacent to it will bring you one level up in the function or will exit you out of the
function you are in.These functions may be displayed on either side of the
display.
Previous When viewing a list, pressing the <Previous soft key will take you back to the
previously shown item.
Next Press the Next> soft key to pass over the present item(s) in a menu or function.