Briggs & Stratton 135200 - Manual (Page 9)

9
STARTING AND STOPPING
REWIND (MANUAL) STARTER
TO START ENGINE
Choke
[1] Check oil level (see p. 7).
[2] Move throttle (if equipped) to FAST. Operate engine with throttle in FAST.
[3] Move choke lever to CHOKE.
OIL LEVEL
Throttle
FULL
[4] Move stop lever (if
equipped) to ON.
[5] Grasp rope handle. Pull
slowly until resistance is
felt, then pull rapidly to
start engine and avoid
kickback.
[6] Let engine warm up.
Choke Equipped: Move
choke control lever
toward RUN a short dis-
tance at a time over sev-
eral seconds in warm
weather or minutes in cold
weather. Let engine run
smoothly before each
change. Operate with
choke in RUN.
WARNING
Stop
TO STOP ENGINE
CAUTION: Do not stop engine by moving choke
control to CHOKE. Backfire, fire or engine damage
could occur.
[1] Move throttle (if
equipped) to SLOW, then
to OFF/STOP.
[2] Move stop lever (if
equipped) to STOP/OFF.
Stop
OR
Throttle