Britax MARATHON CS - Manual (Page 20)

36 37
Care and Maintenance Care and Maintenance
Harness Buckle Removal
Fully recline the child seat. 1
Locate the metal buckle strap retainer on the 2
bottom of the child seat.
Pull the retainer away from the child seat to 3
loosen.
Turn the retainer so the short side will fit through 4
the slot in the child seat shell (Fig. A).
Push the retainer through the slots in the shell and cover, to the top 5
of the child seat.
Re-threading the Harness Buckle
Locate the slot in cover and shell for the harness buckle. 1
Turn the buckle retainer so the short side will fit through the slot in the 2
cover and the child seat shell (Fig. A).
Push the retainer through the slots in the shell and cover, to the bottom 3
of the child seat.
Pull the harness buckle away from the child seat until tight and verify 4
the strap is not twisted and the release button is facing outward.
A
Cleaning the Harness Buckle
If a child eats and drinks while in the child seat,
the harness buckle may need to be periodically
checked and cleaned of any food, drink or other
debris.
REMOVE BUCKLE as described on page 36. •
THOROUGHLY RINSE using warm water (Fig. B). •
TEST THE HARNESS BUCKLE by fastening •
(Fig. C) and unfastening (Fig. D) until a positive
click is heard after inserting each buckle
tongue. If either click is not heard, repeat
cleaning procedure.
TOWEL DRY •
DO NOT • lubricate, use solvents, abrasive
cleaners, soap or other household detergents.
b
x 2
x 2
d
x 2
x 2
C