Brother Printer/Copier DCP-8110DN - Manual (Page 24)

Chapter 3
20
f
Turn over your identification card and
place it at the left side of the scanner
glass.
g
Press Start. The machine scans the
other side of the card and prints the
page.
Note
When 2 in 1 ID Copy is chosen, the
machine sets the quality to Photo and the
contrast to +2 (-nnnno+).
Tray selection
3
You can change the Tray Use only for the
next copy.
a
Load your document.
b
Use the numeric keys to enter the
number of copies (up to 99).
c
Press Options. Press a or b to choose
Tray Select
. Press OK.
d
Press d or c to choose the MP>T1,
M>T1>T2
1
, T1>MP, T1>T2>M
1
,
#1(XXX)
2
, #2(XXX)
1 2
or MP(XXX)
2
.
Press OK.
1 T2 and #2 appears only if the optional lower
tray is installed on DCP-8150DN or
DCP-8155DN.
2 XXX is the paper size you set in Menu, 1, 1, 2.
e
Press Start.
Note
To change the default setting for Tray
Select, see Basic User's Guide: Tray Use
in COPY mode.
Duplex (2-sided)
copying
3
If you want to use the automatic duplex copy
feature, load your document in the ADF.
If you get an Out of Memory message while
you are making duplex copies, try installing
extra memory. (See Installing extra memory
uu
page 41.)
Duplex Copy (long edge flip)
3
DCP-8110DN and DCP-8150DN
 1sidedi2sided L
Portrait
Landscape
a
Load your document.
b
Enter the number of copies (up to 99)
using the numeric keys.
c
Press Duplex and a or b to select
1sidedi2sided L
.
Duplex
a
Off
1sidedi2sided L
b 1sidedi2sided S
Select ab or OK
Press OK.
d
Press Start to copy the document.
1
2
1
2
1
2
1
2