Bloomfield 0443 - Manual (Page 14)

SERVICING INSTRUCTIONS
CAUTION:
SHOCK HAZARD
Opening access panels or
removing warmer plates on this
brewer may expose uninsulated
electrical components.
Disconnect brewer from
electrical power before
removing any panel
Trouble shooting guides,
component views and parts lists
are included for general
reference, and are intended for
use by qualified service
personnel..
ACCESS PANELS
WARMER PLATES:
Warmer plates unscrew counter-clockwise.
TOP PANEL:
Remove top panel to access hot water tank, thermostat, heating
elements, brew circuit tubing, faucet valve and piping, and top-
mounted warmers.
Top panel is held by screws around the edge.
FRONT PANEL:
Remove front panel to access timer.
Models 0412 and 0443:
Front panel and main warmer panel are one piece, and are held
by screws around the edge and a retaining lip at the top.
Models 0471 and 0472:
Front panel and main warmer panel are one piece, and are held
by screws around the edge and a retaining lip at the top and at
the rear warmer plate panel. This panel is secured to the cabinet
by the warmer plate.
Model 0482:
The front panel is held by two screws at the bottom and a
retaining lip at the top.
SOLENOID DOOR:
Remove solenoid door to access solenoid plumbing connections.
Solenoid door is held by two screws and a retaining lip.
12
685
77110
Ow
ners
M
a
n
ual Ho
ri
z
o
n™ Brew
ers