BUSH DAB + digital radio with touch control BR20DAB - Manual (Page 14)

BR20DAB
14
Using the FM Radio
If the DAB+ Radio is in DAB+ mode, press the MODE Button to select FM mode.
Automatic Tuning
Press
the SCAN Button to automatically search for the next available station.
If the reception is poor, try Manual Tuning (see ‘Manual Tuning below’) to
fine-tune the stations.
Manual Tuning
Rotate
the SELECT Button to manually tune through the frequency band.
The frequency will increase or decrease in steps of 0.05 MHz for each turn of the
SELECT Button.
Storing FM Presets
You can preset up to 10 FM stations. The procedure for storing and recalling FM
presets is the same as described on page 10.
Time - Allows you to set the time and date manually or update automatically from the
DAB+ or FM radio broadcast.
Backlight - Allows you to set the backlight time-out from 10, 15, 30, or 60 seconds,
or keep the backlight on.
Factory Reset - this will reset all preset values and begin a full scan for DAB+ stations.
Software Version - This displays information about the current software installed in
the DAB+ Radio.
Daily Use FM
1
1
1
2
2
DON’T FORGET!
You may hear background noise as no station may have been tuned yet. The
display will show the frequency of the FM station.
DON’T FORGET!
If the reception does not improve, try altering the position of the antenna. If the
reception is still poor, scan again to determine whether a stronger signal exists for
the desired frequency.