Philips Saeco Syntia Kaffeevollautomat - Manual (Page 43)

• 43 •
English
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Black
Orange
Black
Functions
COFFEE TEMPERATURE
This function allows you to adjust the cof-
fee brewing temperature.
TIMER (STAND-BY)
This function allows you to adjust the
time the machine will go into stand-by
mode after the last brewing.
CONTRAST
This function allows you to adjust the
contrast of the display to better view the
messages.
WATER HARDNESS
This function allows you to adjust the
water hardness in order to better manage
machine maintenance:
= very soft water
= soft water
= hard water
= very hard water
For more details, see the
"Water hardness measure-
ment" section.
“INTENZA” WATER FILTER
This function allows you to manage the
“Intenza” water fi lter.
For more details, see the section related
to fi lter handling.
Programming example
In this example, we want to explain how
to programme the display contrast. Pro-
ceed in a similar manner to change the
other functions.
Change the machine status to stand-by
mode.
When the machine is in stand-by mode,
FACTORY SETTINGS
This function allows you to reset all fac-
tory values.
press the “ “button to access pro-
gramming.
The fi rst page is displayed.
Press the “ “ button until the “CON-
TRAST” function is displayed.
Press the “ ” button 1 (one) time to
increase the contrast.
Press the “ “ button to confi rm.
Press the “ON/OFF” button to exit the pro-
gramming mode.
At this point, the function is programmed
and will be active the next time the ma-
chine is started.