Philips SENSEO® Latte Duo Kaffeepadmaschine - Manual (Page 3)

8. During the descaling cycle, the descaling solution
comes out of the machine in intervals.
When all the descaling solution in the water
reservoir has been used up after approximately
50 minutes, the on/off button flashes quickly and
CALC button flashes slowly.
Remove the used pad and clean the pod holder
after descaling
1 l
9. Empty the bowl and place it back under the spout.
10. Rinse the water reservoir with running water
and fill the water reservoir with fresh water up
to the MAX indication. Then put the water
reservoir back into the coffee machine.
11. Press the CALC button to start the flushing
cycle. The water flows continuously for
approximately 5 minutes.
Wait until the machine has completed the
flushing cycle the on/ off button flashes quickly
and CALC button flashes slowly.
12. Repeat steps 9 - 12 twice to complete the three
flushing cycles.
Once the last flushing cycle has finished, the
machine switches off automatically.