Braun 6520 - Manual (Page 2)

3
Our products are designed to meet the highest
standards of quality, functionality and design.
We hope you entirely enjoy your new Braun
shaver.
Caution
• Do not use the shaver near, or over, basins filled
with water (e. g. bath tubs, showers etc.).
• For safety reasons, periodically check the cord for
damage and replace it, if it is loose in the shaver
socket.
1 Description
1 Foil protection cap
2 Triple shaving frame
3 Duo cutter block
4 Release button
5 Long hair trimmer
6 Switch
7 Switch lock
8 Low-charge light (red) (only 6520/6515)
9 Charging light (green)
j Shaver socket
2 Charging the shaver
• When charging the shaver for the first time,
connect it to the mains and charge it for at least
4 hours (switch position «0»).
Then shave without the cord until the red low-
charge light starts flashing.
(Modell 6510: Shave without the courd until the
shaver runs distinctly slower.)
• Subsequent charges will take approximately
1 hour.
• Wattage: 6 Watts
Voltage range during charging: 12 - 240 V ȃ /
50 or 60 Hz (automatic adaption).
Best environmental temperature range for
charging: 15 °C to 35 °C
2
English
Flex Integral 6520 Flex Integral 6515
Flex Integral 6510