BT studio 2300 SMS - Manual (Page 38)

On-Air 2300 SMS user guide ~ Edition 3.1 ~ 16th August ’02 ~ 4698
37
When you connect your telephone to a
switchboard, you can set the switchboard’s
external line access code so that when you make
an external call using the handset directory,
redial list or preparatory dialling, the code is
automatically dialled before the number.
Switchboard external line
access code
C OK
C OK
To set the external line access code
Press the UP or DOWN button to
select Base.
Press OK.
Press the UP or DOWN button to
select Base settings.
Press OK.
Press the UP or DOWN button to
select Phone line.
Press OK.
Press the UP or DOWN button to
select Prefix.
Press OK.
Press OK to select Prefix val.
Enter the switchboard external line
access code, e.g. 9. You can enter
codes up to 8 digits in length.
Press OK to store.
Now you must set the number of digits
required to make internal calls to other
extensions on your switchboard.
Press the UP or DOWN button to
select Min.length.
Press OK.
Enter the number of digits to make an
internal call to other extensions on
your switchboard.
Press OK to store.
C OK
▲
▼
▲
▼
▲
▼
C OK
C OK
C OK
C OK
C OK
▲
▼
▲
▼
Press the UP button to select Base.
Press the OK button to confirm.
Use the DOWN button to scroll to
Base settings
.
Press the OK button to confirm.
Press the DOWN button to scroll to
Phone Line
.
Press the OK button.
The display will show Line type.
Press the DOWN button to scroll to
Dial type
.
Press the OK button.
Use the UP or DOWN button to
highlight either Pulse for pulse dialling
or Frequency for tone dialling.
Press the OK button to confirm.
To change between tone and pulse
dialling
▲
▼
▼
C OK
C OK
C OK
C OK
C OK
▼
▲
▼