BT Freestyle 3500 - Manual (Page 51)

Memory full
If the memory becomes full when a caller is leaving a
message the machine announces “Memory full, thank you
for calling” and hangs up.
When the memory is full, your answering machine will
automatically switch to Answer Only mode. You must
delete messages to allow for more messages to be
recorded, see page 50.
Answer delay
Answer delay sets the number of times your BT Freestyle
3500 will ring before the answering machine picks up
your call. The default setting is 6 rings. You can change
this setting to 2-8 rings or to time saver mode.
1. Press twice to enter the answering machine mode.
2. Press or until Ans settings is displayed. Press
to select. Listen to the voice prompt, “To hear the main
menu, press 1”.
3. Press to hear the menu choices.
4. Keep pressing until you hear the answer delay
setting you want.
5. Press and hold to return to standby mode.
51 Answering machine
If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]
Time Saver
Time Saver can save you the cost
of a call when you want to ring in
to find out if you have new
messages.
If your answering machine answers
after 2 rings, you have new
messages. If you have no new
messages it will answer after
6 rings.
So if you hear a third ring, you can
hang up before you are connected,
saving you the cost of a call.