Philips Avance Collection Stabmixer - Manual (Page 8)

Blending quantities and processing times
Ingredients Blending quantity Time Speed
Fruits & vegetables 100-200g 30sec. Turbo
Baby food, soups & sauces 100-400ml 60sec. 15-20
Batters 100-500ml 60sec. 15-20
Shakes & mixed drinks 100-1000ml 60sec. 15-20
2 Attach the blender bar to the motor unit (‘click’) (Fig. 2).
3 Put the plug in the wall socket.
4 Immerse the blade guard completely in the ingredients.
5 Press the on/off button or the turbo button to switch on the appliance (Fig. 3).
- When you use the on/off button, you can adjust the speed with the speed ring. The higher the
speed, the shorter the processing time required.
- The speed ring has settings from 1 (low speed) to 20 (high speed).
- When you use the turbo speed button, the appliance operates at maximum speed. In this case,
you cannot adjust the speed with the speed ring.
6 Move the appliance slowly up and down and in circles to blend the ingredients.
medium chopper (HR1652 only)
The chopper is intended for chopping ingredients such as nuts, meat, onions, hard cheese, boiled
eggs, garlic, herbs, dry bread etc. The medium chopper is supplied with a blade unit with straight
blades and an ice-crushing blade unit with serrated blades. For all ingredients mentioned in the table
below you have to use the blade unit with straight blades. Use the ice-crushing blade unit with
serrated blades for crushing ice cubes only.
Be very careful when you handle the blade units, the blades are very sharp. Be particularly careful
when you remove the blade unit from the chopper bowl, when you empty the chopper bowl and
during cleaning.
Caution: Do not process more than 1 batch without interruption. Let the appliance cool down
for 5 minutes before you continue processing.
Note: Cut large ingredients into pieces of approx. 2cm before you process them.
1 Put the blade unit in the chopper bowl (Fig. 4).
2 Put the ingredients in the chopper bowl.
See the table for the recommended quantities and processing times.
EnglisH 8