Brother HL-3400CN Series - Manual (Page 104)

CHAPTER 4 CONTROL PANEL
4–33
PAGE PROTECTION
✒ Note
The setting in this mode menu is effective in the HP PCL5C, EPSON FX-
850, IBM Proprinter XL and HP-GL modes. It does not appear in the BR-
Script 2 mode.
If print images are too complex to print, the printer may print them in
parts or only on part of the page. If this occurs, the printer loses print data
and shows a message on the LCD panel.
The page protection function reserves additional memory so that the
printer can create the entire page image in memory before physically
printing it. This function can be set for 330 x 483mm (13"x19"), Ledger,
letter, A3, A4 or legal size paper. Select the paper size for page
protection.
Display Message Page Protection
PROTECT=AUTO Page protection on only when it is
necessary. (Factory setting)
PROTECT=LETTER Page protection on for letter size
paper.
PROTECT=A4 Page protection on for A4 size paper.
PROTECT=LEGAL Page protection on for legal size paper.
PROTECT=OFF Page protection off
To protect pages, your printer will need the minimum memory shown in
the following table:
Protection 600 dpi Color
Off 16 Mbytes
Letter or A4 20 Mbytes
Legal 24 Mbytes
✒ Note
When you use the page protection function, note the following:
• If the function setting is changed, all download fonts and macros—
including permanent ones—are cleared. If the memory is too low to
protect pages, page protection does not take effect.