Bel Canto Design eVo2i - Manual (Page 10)

page 10 © 2002-2004 bel canto design, Ltd. eVo2i User’s Guide rev081104
Power output per channel into 8 ohms • 120 watts <1% THD+N
Power output per channel into 4 ohms • 200 watts <1% THD+N
Bandwidth: +/- 3dB •1Hz-80KHz
Volume setting for unity gain • 84.0 (Inputs to Line output)
Input for full output with volume set to 84.0 • 1.9V RMS
Signal to Noise Ratio @ 1 watt out • >96 dB A weighted, 20 kHz
Distortion @ 1 watt/1kHz • <0.05%
Damping Factor • >100
Input configuration and impedance,single-ended/balanced • 10 Kohm/20 Kohm
Gain • 16 dB Preamplifier section, 23 dB Amplifier section
Standby power • 15 Watts
Maximum power • 500 Watts
Input Overload, Single Ended/Balanced • 10V RMS
Power Requirements • 100-120 VAC 50-60 Hz or 220-240 VAC 50-60 Hz
Dimensions • 17.5" W x 14.5" D x 4.5" H (445 mm x 368 mm x 114 mm)
Weight • 37 lbs. (13 kg)
Specifications