Important safeguards, Special instructions, Save these instructions – Black & Decker LIGHT N' EASY IR1925W User Manual

Page 2

Advertising
background image





ENGLISH

POLARIZED PLUG (10V Models Only)

This appliance has a polarized plug (one blade is wider than the other). To

reduce the risk of electric shock, this plug is intended to fit into a polarized

outlet only one way. If the plug does not fit fully into the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician. do not attempt to

modify the plug in any way.
ELECTRICAL CORD

a) A short power-supply cord (or detachable power-supply cord) is to be

provided to reduce the risk resulting from becoming entangled in or

tripping over a longer cord.

b) longer detachable power-supply cords or extension cords are available

and may be used if care is exercised in their use.

c) If a long detachable power-supply cord or extension cord is used,
1) The marked electrical rating of the detachable power-supply cord

or extension cord should be at least as great as the

electrical rating of the appliance,

2) If the appliance is of the grounded type, the extension cord

should be a grounding-type 3-wire cord, and

3) The longer cord should be arranged so that it will not drape

over the countertop or tabletop where it can be pulled on by

children or tripped over.

Note: If the power supply cord is damaged, it should be replaced by qualified

personnel; in latin America, by an authorized service center.

Please Read and Save this Use and Care Book.

IMPORTANT SAFEGUARDS

When using electrical appliances basic safety precautions should always be

followed including the following:

Read all instructions.

Use iron only for its intended use.

To protect against a risk of electric shock, do not immerse the iron in

water or other liquids.

The iron should always be turned to oFF (0) before plugging or

unplugging from outlet. Never yank cord to disconnect from the outlet;

instead grasp plug and pull to disconnect.

do not allow cord to touch hot surfaces. let iron cool completely before

putting away. loop cord loosely around iron when storing.

Always disconnect iron from electrical outlet when filling with water or

emptying, and when not in use.

do not operate iron with a damaged cord, or if the iron has been dropped

or damaged. To avoid the risk of electric shock, do not disassemble the

iron; take it to a qualified service person for examination and repair,

or call the appropriate toll-free number on the cover of this manual.

Incorrect reassembly can cause a risk of electric shock when the iron is

used.

Close supervision is necessary for any appliance being used by or near

children. do not leave iron unattended while connected or on an ironing

board.

Burns can occur from touching hot metal parts, hot water or steam. Use

caution when you turn a steam iron upside down or use the surge of

steam – there may be hot water in the reservoir. Avoid rapid movement

of iron to minimize hot water spillage.

SPECIAL INSTRUCTIONS

To avoid a circuit overload, do not operate another high-wattage

appliance on the same circuit.

If an extension cord is absolutely necessary, a cord rate at 15-ampere

cord should be used. Cords rated for less amperage may overheat.

Care should be taken to arrange the cord so that it cannot be pulled or

tripped over.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

Advertising