Blaupunkt MILANO MP26 - Manual (Page 29)

56
External audio sources
External audio sources
Instead of the CD changer, you can also
connect another external audio source
equipped with a line output. Audio sources
can, for example, be portable CD players,
MiniDisc players or MP3 players.
If you want to connect an external audio
source, you will need an adapter cable.
You can obtain this cable (Blaupunkt no.:
7 607 897 093) from your authorised
Blaupunkt dealer.
Note:
If no CD changer is connected, the AUX
input must be switched on in the menu.
Switching the AUX input on/off
u Press the MENU button 5.
The display shows "MENU".
u Press the or button 8 repeatedly
until "AUX OFF" or "AUX ON" appears
on the display.
u Press the or button 8 to switch
AUX on or off.
When you have fi nished making your chang-
es,
u press the MENU button 5.
Note:
If the AUX input is switched on, you
can select it by pressing the SRC
button 4. "AUX INPUT" then appears
on the display.
Specifi cations
Amplifi er
Output power: 4 x 18 watt sine
according to
DIN 45 324
at 14.4 V
4 x 45 watt max.
power
Tuner
Wavebands in Europe:
FM :
87.5 - 108 MHz
MW : 531 - 1 602 kHz
LW : 153 - 279 kHz
FM frequency response:
35 - 16,000 Hz
CD
Frequency range: 20 - 20,000 Hz
Pre-amp out
4 channels: 3 V
Input sensitivity
AUX input: 2 V / 6 kΩ
Specifi cations
Subject to changes!
02Milano_SRemoMP26_eng.indd 56 02Milano_SRemoMP26_eng.indd 56 17.03.2006 15:27:08 Uhr 17.03.2006 15:27:08 Uhr