Philips Kaffeemaschine - Manual (Page 10)

troubleshooting
If problems should arise with your coffee maker and you are unable to solve them by means of the
troubleshooting guide below, please contact the nearest Philips service centre or the Philips
Customer Care Centre in your country.
Problem Solution
The light is on and cannot
be switched off.
The appliance is equipped with an automatic shut-off function and
cannot be switched off manually. The appliance switches off
automatically after brewing (when the water tank is empty) and the
light goes out. If problems occur during brewing, you can only switch
the appliance off by removing the mains plug from the wall socket.
Brewing coffee takes
longer than usual.
The appliance needs to be descaled (see chapter ‘Descaling’).
The coffee maker
switches off before the
water tank is empty.
The appliance needs to be descaled (see chapter ‘Descaling’).
The coffee is not hot
enough.
Rinse the jug with hot water before brewing. The coffee will stay
warm longer if you brew a full jug (or at least half a jug).
The jug cannot be placed
in the appliance.
The jug can be placed in the appliance with the handle pointing
straight forward or completely to the right, but not with the handle
pointing completely to the left. Make sure the lid of the jug is in
‘closed/brewing’ position r.
The filter overflows when
the jug is removed from
the appliance during
brewing.
Do not remove the jug for more than 30 seconds, to prevent the
filter from overflowing.
EnglisH 10