Mp3 cds – Bench KH 4438 User Manual

Page 12

Advertising
background image

12

Repeated playback of all CD songs

Press the MODE button twice when playing a CD and ”REPT ALL” appears on the display. All of

the songs of the CD inserted will be repeated until the STOP or MODE button is pressed once to

change back to normal playback operation.

MP3 CDs

Note: The read in/scanning times are somewhat longer due to the greater memory capacity of

MP3 discs.

Playback

1. Open the CD compartment, insert the MP3 CD correctly, close the CD compartment and press

the PLAY/PAUSE button.

2. ”READ” appears on the display and the player now reads in the information from the MP3 CD

and shows it as follows:

Selecting songs

You may select the desired song in MP3 operation in the same fashion as when playing conven-

tional CDs with the SKIP buttons (forwards/backwards).

When selecting various songs from various catalogues, please select the catalogue prior to select-

ing the desired song from the catalogue. Then proceed as follows:

1. Keep the ALBUM/ESP/10+ button pressed down and the rst catalogue of the CD is shown in the display.

2. Select the desired catalogue with the SKIP buttons : or 9.

3. Then press the PLAY/PAUSE button; the rst song of the selected catalogue is shown in the

display and playback starts.

You can select other songs in the desired catalogue with the SKIP button (forwards/backwards).

Repeated playback of individual songs

Repeated playback of the entire CD

Introduction function

Shufe

Proceed in the same fashion to activate these functions as with conventional CDs (refer to the

corresponding sections in the chapter on conventional CDs).

Advertising